LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Interior Trim And Paneling) >> Repair Instructions >> Floor Trim Plate Replacement - Rear (Avalanche/Escalade EXT)

Floor Trim Plate Replacement - Rear (Avalanche/Escalade EXT)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Floor Trim Plate Assembly & Retainers
GM1702735Courtesy of GENERAL MOTORS CORP.
Floor Trim Plate Replacement - Rear (Avalanche/Escalade EXT)

Callout Component Name

Preliminary Procedures

  1. Remove body lock pillar garnish molding. Refer to Body Lock Pillar Garnish Molding Replacement (Avalanche/Escalade EXT)  or Body Lock Pillar Garnish Molding Replacement (Suburban/Yukon XL/Escalade ESV)  or Body Lock Pillar Garnish Molding Replacement (Tahoe/Yukon/Escalade) .
  2. Remove midgate hinges. Refer to Hinge Replacement - Midgate .
1 Rear Floor Trim Plate Assembly
2 Rear Floor Trim Plate Retainers (Qty: 3)