Park Brake Release Handle Assembly Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Park Brake Release Handle Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Bolt, Park Brake Release Handle (Qty: 1) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
2	Cable, Park Brake Release Handle Tip: Slide the park brake release cable forward to remove it from the park brake module.
3	Handle, Park Brake Release