Instrument Panel Cluster Trim Plate Cover Replacement (Except Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Instrument Panel Cluster Trim Plate Cover Assembly & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Tilt the steering wheel to its lowest position. Remove the instrument panel left air deflector. Refer to Deflector Replacement - Instrument Panel Air - Left (Cadillac) or Deflector Replacement - Instrument Panel Air - Left (Except Cadillac) . Remove the instrument panel center trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center (Cadillac) or Trim Panel Replacement - Instrument Panel (I/P) Center (Except Cadillac) .
1	Instrument Panel Cluster Trim Plate Cover Assembly Screws (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Instrument Panel Cluster Trim Plate Cover Assembly

Callout

Component Name

Preliminary Procedures

Tilt the steering wheel to its lowest position.
Remove the instrument panel left air deflector. Refer to Deflector Replacement - Instrument Panel Air - Left (Cadillac) or Deflector Replacement - Instrument Panel Air - Left (Except Cadillac) .
Remove the instrument panel center trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center (Cadillac) or Trim Panel Replacement - Instrument Panel (I/P) Center (Except Cadillac) .

Instrument Panel Cluster Trim Plate Cover Assembly Screws (Qty: 4)

NOTE: Refer to Fastener Notice .

Tighten: 2 N.m (18 lb in)

Instrument Panel Cluster Trim Plate Cover Assembly