LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Instrument Panel Accessory Trim Plate Replacement (Cadillac)

Instrument Panel Accessory Trim Plate Replacement (Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Instrument Panel Accessory Trim Panel & Clips
GM1702505Courtesy of GENERAL MOTORS CORP.
Instrument Panel Accessory Trim Plate Replacement (Cadillac)

Callout Component Name

Preliminary Procedures

  1. Remove the instrument panel center trim plate. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center (Cadillac)  or Trim Panel Replacement - Instrument Panel (I/P) Center (Except Cadillac) .
  2. Remove the front floor console bezel. Refer to Floor Console Bezel Replacement (Cadillac)  or Floor Console Bezel Replacement (Except Cadillac) .
1 Instrument Panel Accessory Trim Panel
Tip: 
  1. Disconnect the electrical connections.
  2. If replacing the accessory trim plate transfer all necessary components.
2 Retainer Clips (Qty: 6)