Rear Seat Number 2 Load Floor Latch Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Rear Seat Number 2 Load Floor Latch Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the rear seat. Refer to Rear Number 2 Seat Replacement (Suburban/Yukon XL) or Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) . |
|
| 1 | Rear Seat No. 2 Back Latch Finish Cover Refer to Rear Seat Number 2 Back Cushion Latch Cover Replacement (AS3) or Rear Seat Number 2 Back Cushion Latch Cover Replacement (AW2) . |
| 2 | Rear Seat No. 2 Back Cushion Latch Cover Refer to Seat Cushion Panel Replacement - Rear No. 2 (AS3) or Seat Cushion Panel Replacement - Rear No. 2 (AW2) . |
| 3 | Rear Seat No. 2 Back Cushion Latch Cover Refer to Seat Cushion Panel Replacement - Rear No. 2 (AS3) or Seat Cushion Panel Replacement - Rear No. 2 (AW2) . |
| 4 | Rear Seat #2 Load Floor Latch Bolt (Qty: 4)
NOTE:
Refer to Fastener Notice
.
Tighten: 9 N.m (80 lb in) |
| 5 | Rear Seat #2 Load Floor Latch Tip: Release the cables from the latch, note cable location for installation. |