Seat Cushion Panel Replacement - Rear No. 2 (AW2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat No. 2 Cushion Panel & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the rear seat. Refer to Rear Number 2 Seat Replacement (Suburban/Yukon XL) or Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) .
1	Rear Seat No. 2 Back Cushion Latch Finish Cover Screw NOTE: Refer to Fastener Notice in Cautions and Notices. Tighten: 2 N.m (18 lb in)
2	Rear Seat No. 2 Back Cushion Latch Finish Cover
3	Rear Seat No. 2 Cushion Compartment Screw (Qty: 3) Tighten: 2 N.m (18 lb in)
4	Rear Seat No. 2 Cushion Compartment
5	Rear Seat No. 2 Back Cushion Latch Cover Screw (Qty: 3) Tighten: 2 N.m (18 lb in)
6	Rear Seat No. 2 Back Cushion Latch Cover
7	Rear Seat No. 2 Back Cushion Latch Cover Screw (Qty: 3) Tighten: 2 N.m (18 lb in)
8	Rear Seat No. 2 Back Cushion Latch Cover