LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Rear Seat Number 2 Back Cushion Latch Cable Replacement

Rear Seat Number 2 Back Cushion Latch Cable Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Seat No. 2 Back Cushion Latch Cable Assembly
GM1683933Courtesy of GENERAL MOTORS CORP.
Rear Seat Number 2 Back Cushion Latch Cable Replacement

Callout Component Name

Preliminary Procedure

  1. Remove the rear seat. Refer to Rear Number 2 Seat Replacement (Suburban/Yukon XL)  or Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) .
  2. Remove the rear seat cushion trim covers. Refer to Seat Cushion Panel Replacement - Rear No. 2 (AS3)  or Seat Cushion Panel Replacement - Rear No. 2 (AW2) .
1 Rear Seat #2 Back Cable Assembly