Rear Seat Latch Release Handle Replacement (Rear No. 2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Latch Release Handle Assembly & Nut

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to Rear Number 2 Seat Replacement (Suburban/Yukon XL) or Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) . Remove the lower finish cover. Refer to Seat Cushion Panel Replacement - Rear No. 2 (AS3) or Seat Cushion Panel Replacement - Rear No. 2 (AW2) .
1	Rear Seat Latch Release Handle Nut (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
2	Rear Seat Latch Release Handle Assembly

Callout

Component Name

Preliminary Procedure

Remove the rear seat. Refer to Rear Number 2 Seat Replacement (Suburban/Yukon XL) or Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) .
Remove the lower finish cover. Refer to Seat Cushion Panel Replacement - Rear No. 2 (AS3) or Seat Cushion Panel Replacement - Rear No. 2 (AW2) .

Rear Seat Latch Release Handle Nut (Qty: 2)

NOTE: Refer to Fastener Notice .

Tighten: 9 N.m (80 lb in)

Rear Seat Latch Release Handle Assembly