Headlining Rear Trim Panel Replacement (Extended Wheelbase)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Headliner Trim Panel Assembly & Retainer

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Disable roof rail SIR system. Refer to SIR Disabling and Enabling . Remove back body opening molding. Refer to Garnish Molding Replacement - Rear Door Upper . Remove body rear corner upper molding. Refer to Garnish Molding Replacement - Rear Corner (Tahoe/Suburban) . Remove coat hooks. Refer to Coat Hook Replacement . Place rear seats in stowed position.
1	Rear Headliner Trim Panel Retainer (Qty: 2) Tip: Install push pin retainer to back body opening frame. Install push pin retainer to roof bow. Retainers are one time use only.
2	Rear Headliner Trim Panel Assembly

Callout

Component Name

Preliminary Procedures

Disable roof rail SIR system. Refer to SIR Disabling and Enabling .
Remove back body opening molding. Refer to Garnish Molding Replacement - Rear Door Upper .
Remove body rear corner upper molding. Refer to Garnish Molding Replacement - Rear Corner (Tahoe/Suburban) .
Remove coat hooks. Refer to Coat Hook Replacement .
Place rear seats in stowed position.

Rear Headliner Trim Panel Retainer (Qty: 2)
Tip:

Install push pin retainer to back body opening frame.
Install push pin retainer to roof bow.
Retainers are one time use only.

Rear Headliner Trim Panel Assembly