Garnish Molding Replacement - Rear Corner (Tahoe/Suburban)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Body Rear Corner Upper Garnish Molding Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Disable roof rail SIR system. Refer to SIR Disabling and Enabling . Remove rear opening garnish molding. Refer to Garnish Molding Replacement - Rear Door Upper .
1	Body Rear Corner Upper Garnish Molding Cover Tip: Disconnect the 2 electrical connectors.
2	Body Rear Corner Upper Garnish Molding Screw NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
3	Body Rear Corner Upper Garnish Molding Assembly
4	Body Rear Corner Upper Garnish Molding Clips (Qty: 3)
5	Body Rear Corner Upper Garnish Molding Retainers (Qty: 3)