LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 502 (Transfer Case - Mp 3010 (NP0)) >> Repair Instructions - On Vehicle >> Transfer Case Selector Switch Replacement

Transfer Case Selector Switch Replacement

WARNING: This page is about a different car, the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Transfer Case Control Switch
GM1696845Courtesy of GENERAL MOTORS COMPANY
Transfer Case Selector Switch Replacement

Callout Component Name
Preliminary Procedure 
Remove the headlight bezel. Refer to Headlamp Switch Bezel Replacement (Except Cadillac) , Headlamp Switch Bezel Replacement (Cadillac) .
1 Transfer Case Select Switch
  • Disconnect the electrical connectors from the headlight and control switches.
  • It may be necessary to use a small flat bladed screw driver to depress the locking tabs to remove the control switch.