Conditions for Clearing the DTC
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
DTC is cleared by cycling ignition.
DTC C0563
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Air Suspension Schematics | |||
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle |
| 2 | Perform the suspension position calibration. Refer to Suspension Position Calibration . Does the DTC reset? |
Go to Step 3 | System OK |
| 3 | Replace the air suspension module. Refer to Control Module References
. Did you complete the replacement? |
System OK | - |