LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 473 (Power Seat System) >> Repair Instructions >> Front Seat Adjuster Replacement (with HP2)

Front Seat Adjuster Replacement (with HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Seat Adjuster Replacement (with HP2)
GM1966914Courtesy of GENERAL MOTORS COMPANY
Front Seat Adjuster Replacement (with HP2)

Callout Component Name

Preliminary Procedure

  1. Remove the front seat. Refer to Front Seat Replacement - Bucket (without HP2) , Front Seat Replacement - Bucket (with HP2) .
  2. Remove the front seat back cushion cover and pad. Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement (with HP2) , Driver or Passenger Seat Back Cushion Cover and Pad Replacement (without HP2) .
  3. Remove the front seat cushion cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement (without HP2) , Seat Cushion Trim Cover and Pad Replacement (with HP2) .
1 Front Seat Back Frame Bolt (Qty: 4)
CAUTION:

Refer to Fastener Caution .


Tighten 
50 N.m (37 lb ft)
2 Front Seat Adjuster Assembly

Procedure

  1. Disconnect the lumbar actuator assembly from the seat back frame and lumbar support.
  2. When replacing the seat adjuster assembly, transfer components as necessary.
scientia non olet · About LEMON Manuals