LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 443 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Front Seat Replacement - Bucket (with HP2)

Front Seat Replacement - Bucket (with HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Seat Assembly & Components
GM1967646Courtesy of GENERAL MOTORS COMPANY
Front Seat Replacement - Bucket (with HP2)

Callout Component Name

Preliminary Procedure

  1. Remove the front seat adjuster covers.
  2. Disconnect the seat belt anchor from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front .
1 Front Seat Assembly Bolt (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
90 N.m (66 lb ft)
2 Front Seat Assembly Nut (Qty: 2)
Tighten 
55 N.m (41 lb ft)
3 Front Seat Assembly
Procedure 
Disconnect the electrical connector.
scientia non olet · About LEMON Manuals