Passenger Seat Cushion Ventilation Heating and Cooling Module Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Passenger Heated Seat Module & Nuts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front passenger seat. Refer to Front Seat Replacement - Bucket (without HP2) , Front Seat Replacement - Bucket (with HP2) . Remove the passenger seat cushion cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement (without HP2) , Seat Cushion Trim Cover and Pad Replacement (with HP2) .
1	Passenger Heated Seat Module Nut (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 (80 lb in)
2	Passenger Heated Seat Module Procedure Disconnect the electrical connector.

Callout

Component Name

Preliminary Procedures

Remove the front passenger seat. Refer to Front Seat Replacement - Bucket (without HP2) , Front Seat Replacement - Bucket (with HP2) .
Remove the passenger seat cushion cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement (without HP2) , Seat Cushion Trim Cover and Pad Replacement (with HP2) .

Passenger Heated Seat Module Nut (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
9 (80 lb in)

Passenger Heated Seat Module
Procedure
Disconnect the electrical connector.