LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 451 (Parking Brake System) >> Repair Instructions >> Parking Brake Actuator Replacement (2500 Series)

Parking Brake Actuator Replacement (2500 Series)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Park Brake Shoe Actuator
GM1772110Courtesy of GENERAL MOTORS COMPANY
Parking Brake Actuator Replacement (2500 Series)

Callout Component Name
WARNING:

Refer to Brake Dust Warning .

Preliminary Procedures

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the park brake shoes. Refer to Parking Brake Shoe Replacement (2500 Series) , Parking Brake Shoe Replacement (1500 Series) .
  3. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling .
  4. Disconnect the park brake cable from the actuator.
1 Park Brake Shoe Actuator
TIP:  Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling .