LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 445 (Seat Belt System) >> Repair Instructions >> 3rd Row Seat Belt Retractor Replacement

3rd Row Seat Belt Retractor Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Seat Belt Retractor & Components
GM1701238Courtesy of GENERAL MOTORS COMPANY
3rd Row Seat Belt Retractor Replacement

Callout Component Name

Preliminary Procedure

  1. Remove third row seat. Refer to 3rd Row Seat Replacement (Suburban/Yukon XL) , 3rd Row Seat Replacement (Tahoe/Yukon/Escalade) .
  2. Remove third row seat hinge finish cover. Refer to Rear Seat 3rd Row Hinge Finish Cover Replacement .
  3. Remove third row seat back pad and cover. Refer to 3rd Row Seat Back Cover and Pad Replacement .
1 Rear Seat No. 2 Belt Bolt
CAUTION:

Refer to Fastener Caution .


Tighten 
52 N.m (38 lb ft)
2 Rear Seat No. 2 Belt Bracket Screw (Qty: 2)
Tighten 
2 N.m (18 in)
3 Rear Seat No. 2 Belt Bracket Assembly
4 Rear Seat No. 2 Belt Bolt
Tighten 
52 N.m (38 lb ft)
5 Rear Seat No. 2 Belt Assembly