Cargo Box Bridge Side Inner Panel Replacement (Escalade EXT)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Cargo Box Bridge Side Inner Panel Assembly

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove rear compartment cover assembly. Refer to Cargo Box Front Cover, Center Cover, and Rear Cover Replacement . Remove cargo box bridge center panel. Refer to Cargo Box Bridge Cross Bar Replacement (Escalade EXT) , Cargo Box Bridge Cross Bar Replacement (Avalanche) .
1	Cargo Box Bridge Side Inner Panel Screw (Qty: 4) TIP: Use a flat-bladed tool to release retainers.
2	Cargo Box Bridge Side Inner Panel Assembly

Callout

Component Name

Preliminary Procedures

Remove rear compartment cover assembly. Refer to Cargo Box Front Cover, Center Cover, and Rear Cover Replacement .
Remove cargo box bridge center panel. Refer to Cargo Box Bridge Cross Bar Replacement (Escalade EXT) , Cargo Box Bridge Cross Bar Replacement (Avalanche) .

Cargo Box Bridge Side Inner Panel Screw (Qty: 4)
TIP: Use a flat-bladed tool to release retainers.

Cargo Box Bridge Side Inner Panel Assembly