Cargo Box Front Cover, Center Cover, and Rear Cover Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Cargo Stowage Box & Covers

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Rear Cargo Box Cover Open the endgate to access the latches. Remove the rear cargo panel by pulling the left and right cargo panel latches, located on the bottom of each cargo panel, forward to unlock the cargo panel latches. Lift the cargo panel up and then out from the side rails. The left latch must be locked in place before the right latch. The cargo cover panels may not lock in place correctly if this step is not completed exactly.
2	Center Cargo Box Cover Remove the center cargo panel by pulling the left and right cargo panel latches. Lift the cargo panel up and then out from the side rails. The left latch must be locked in place before the right latch. The cargo cover panels may not lock in place correctly if this step is not completed exactly.
3	Front Cargo Box Cover Remove the front cargo panel by pulling 2 left and 2 right cargo panel latches. Lift the cargo panel up and then out from the side rails. The left latches must be locked in place before the right latches. The cargo cover panels may not lock in place correctly if this step is not completed exactly.
4	Rear Cargo Stowage Box