Removal Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Remove rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Avalanche, Cadillac EXT) , Rear Bumper Fascia Replacement (All Utility, Cadillac ESV) , Rear Bumper Fascia Replacement (Escalade Premium) .
- Disconnect electrical from the rear object sensor.
- Lift the locking tabs on the housing and remove the rear object sensor.
NOTE:
The rear object sensor is a one piece design. Do NOT twist the sensor cap to try and remove the painted cap. Replacement sensor requires painting to match fascia/bumper body color.