Torque Converter Installation and Holding Fixture Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Torque Converter & Holding Fixture

Courtesy of GENERAL MOTORS CORP.

Callout	Procedure
Preliminary Procedure Rotate the transmission so that the fluid pan assembly is down.
1	Transmission Case Assembly Special Tools DT 47605 Holding Fixture J 3289-20 Holding Fixture Base Assembly J 8763-B Holding Fixture For equivalent regional tools, refer to Special Tools .
2	Torque Converter Assembly

Callout

Procedure

Preliminary Procedure
Rotate the transmission so that the fluid pan assembly is down.

Transmission Case Assembly

Special Tools

DT 47605 Holding Fixture
J 3289-20 Holding Fixture Base Assembly
J 8763-B Holding Fixture

For equivalent regional tools, refer to Special Tools .

Torque Converter Assembly