Manual Shift Shaft Seal Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Manual Shift Shaft Seal Replacement
| Callout | Component Procedure |
|---|---|
| 1 | Manual Shift Shaft Seal
CAUTION:
Do not damage the case bore during removal of the manual shift shaft seal.
CAUTION:
When installing the seal, ensure the seal lip is firmly seated against the case bore surface. Do not allow the seal lip to be crushed, or a leak may result.
CAUTION:
Refer to Seal Reuse Caution . Special Tools
For equivalent regional tools, refer to Special Tools . |