Manual Shift Shaft Position Switch Installation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Manual Shift Shaft Position Switch Installation
| Callout | Component Name |
|---|---|
| 1 | A/Trans Manual Shift Shaft Position Switch Assembly |
| 2 | Manual Valve Link TIP: Align the switch activator slide with the manual valve link. |
| 3 | Bolt M5 x 55 TIP: Hand tighten only. |
| 4 | A/Trans Manual Shift Shaft Position Switch Harness Clip TIP: The wiring harness clip on the manual shift shaft position switch does not need to be replaced if damaged or missing. The clip functions only as a manufacturing assembly aid to keep the harness clear during an automated bolt installation process. If the clip is damaged, simply remove and discard. |
| 5 | A/Trans Manual Shift Shaft Position Switch Electrical Connector TIP: Connect and lock the manual shift shaft position switch electrical connector to the control solenoid valve assembly. |