LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 398 (Automatic Transmission - 6L80/6L90 - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Case Extension Assembly Installation

Case Extension Assembly Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Case Extension Assembly & Bolt Tightening Sequence
GM1696453Courtesy of GENERAL MOTORS CORP.
Case Extension Assembly Installation

Callout Component Name
1 NEW Case Extension Seal
2 Case Extension
3 Bolts M10 x 40 (Qty: 6)
CAUTION:

Refer to Fastener Caution .


Procedure 
Tighten in sequence shown.
Tighten 
55 N.m (41 lb ft)