LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 382 (Rear Suspension System) >> Repair Instructions >> Stabilizer Shaft Replacement

Stabilizer Shaft Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Stabilizer Shaft
GM1871122Courtesy of GENERAL MOTORS CORP.
Stabilizer Shaft Replacement

Callout Component Name

Preliminary Procedures

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the rear stabilizer shaft link. Refer to Stabilizer Shaft Link Replacement .
  3. Remove the rear stabilizer shaft insulator. Refer to Stabilizer Shaft Insulator Replacement .
1 Rear Stabilizer Shaft