LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 337 (Disc Brake System) >> Repair Instructions >> Front Brake Shield Replacement (1500 Series) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Wheel Hub And Bearing Assembly
    GM1728956Courtesy of GENERAL MOTORS CORP.
    NOTE:

    Align the relief in the forward edge of the disc brake splash shield with the steering arm on the steering knuckle.

  1. Install the splash shield to the steering knuckle.
  2. Install the wheel hub and bearing assembly. Refer to Front Wheel Hub, Bearing, and Seal Replacement (1500) , Front Wheel Hub, Bearing, and Seal Replacement (2500) .
scientia non olet · About LEMON Manuals