LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 320 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> Underhood Electrical Center or Junction Block Bracket Replacement

Underhood Electrical Center or Junction Block Bracket Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Underhood Electrical Center/Junction Block Bracket And Screws
GM1827694Courtesy of GENERAL MOTORS CORP.
Underhood Electrical Center or Junction Block Bracket Replacement

Callout Component Name
Preliminary Procedure 
Remove the underhood electrical center/junction block. Refer to Underhood Electrical Center or Junction Block Replacement .
1 Underhood Electrical Center/Junction Block Bracket Screws (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
2 Underhood Electrical Center/Junction Block Bracket