LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 320 (Wiring Systems And Power Management - Repair Instructions) >> Repair Instructions >> Underhood Electrical Center or Junction Block Replacement

Underhood Electrical Center or Junction Block Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Underhood Electrical Center/Junction Block
GM1827690Courtesy of GENERAL MOTORS CORP.
Underhood Electrical Center or Junction Block Replacement

Callout Component Name
Preliminary Procedure 
Disconnect the battery. Refer to Battery Negative Cable Disconnection and Connection .
1 Underhood Electrical Center/Junction Block
  • Remove the cover.
  • Release the retainers securing the junction block to the bracket.