LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 298 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Liftgate Weatherstrip Replacement

Liftgate Weatherstrip Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Lift Gate Weatherstrip
GM1684634Courtesy of GENERAL MOTORS CORP.
Liftgate Weatherstrip Replacement

Callout Component Name
Preliminary Procedure 
Remove the liftgate sill plate. Refer to Liftgate Door Sill Plate Replacement .
1 Liftgate Weatherstrip
TIP:  Locate the paint dot on the upper portion of the weatherstrip directly below the electrical pass through. Roll the weatherstrip from the center to the upper corners. Roll the weather strip from the upper corners to the lower corners. Roll the weatherstrip from the lower corners to the center.