LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 298 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Cargo Box Stowage and Midgate Window Opening Weatherstrip Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fold down the rear seat.
  2. Remove the rear removable glass panel.
  3. Remove the midgate. Refer to Midgate Replacement .
    4. Fig 1: Push-in Retainer
    GM2235414Courtesy of GENERAL MOTORS CORP.
  4. Remove the push-in retainer (1).
  5. Starting from one end, remove the weatherstrip from the vehicle.
  6. Clean all mating surfaces for the weatherstrip using a lint-free cloth with Varnish Makers and Painters (VMP) Naptha or a 50/50 mixture, by volume, of isopropyl alcohol and clean drinkable water to remove left over adhesive residue.
scientia non olet · About LEMON Manuals