Tail Lamp Bulb Replacement (Yukon Two-mode Hybrid)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Back Up Lamp, Turn Signal And Side Marker Bulbs

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the rear tail lamp. Refer to Tail Lamp Replacement (Avalanche) , Tail Lamp Replacement (Cadillac) , Tail Lamp Replacement (Chevrolet Tahoe Two-Mode Hybrid) , Tail Lamp Replacement (GMC Yukon Two-Mode Hybrid) , Tail Lamp Replacement (Tahoe, Yukon) .
1	Back Up Lamp Bulb WARNING: Refer to Halogen Bulb Warning . Procedure Twist the bulb socket counter-clockwise and remove the bulb socket from the lamp housing. Pull the lamp bulb straight from the bulb socket.
2	Turn Signal Bulb TIP: The top of the rear lamp is (LED) Light Emitting Diode which is not serviceable.
3	Side Marker Bulb TIP: Twist the bulb socket and remove the side marker lamp bulb.