LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 297 (Lighting System) >> Repair Instructions >> Tail Lamp Bulb Replacement (Tahoe)

Tail Lamp Bulb Replacement (Tahoe)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Tail Lamp Bulb
GM2063155Courtesy of GENERAL MOTORS CORP.
Tail Lamp Bulb Replacement (Tahoe)

Callout Component Name
Preliminary Procedure 
Remove the rear tail lamp. Refer to Tail Lamp Replacement (Avalanche) , Tail Lamp Replacement (Cadillac) , Tail Lamp Replacement (Chevrolet Tahoe Two-Mode Hybrid) , Tail Lamp Replacement (GMC Yukon Two-Mode Hybrid) , Tail Lamp Replacement (Tahoe, Yukon) .
1 Back Up Lamp Bulb
TIP:  Rotate the lamp socket counter-clockwise and remove from the lamp assembly.
2 Park Turn Directional Bulb
3 Side Marker Lamp Bulb
TIP:  Rotate the bulb socket and pull the marker lamp bulb from the socket.
4 Park Turn Directional (LED)
TIP:  The upper portion of the lamp assembly is not serviceable.