Differential Carrier Assembly Disassemble (9.25 Inch Axle): Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
- J 2619-01 Slide Hammer
- J 8614-01 Flange and Pulley Holding Tool. See Special Tools .
- J 22912-B Split-Plate Bearing Puller. See Special Tools .
- J 29369-2 Bushing and Bearing Remover (2-3 in). See Special Tools .
- J 33791 Carrier Bushing Remover/Installer. See Special Tools .
- J 34011 Pilot Bearing Remover. See Special Tools .
- J 36599-A Side Bearing Nut Wrench. See Special Tools .
- J 36615 Side Bearing Nut Wrench. See Special Tools .
- J 36616 Axle Mount Bushing Remover/Installer. See Special Tools .
- J 45754 Pinion Bearing Race Remover/Installer - 9. See Special Tools .25 inch Axle
- J 45765 Pinion Remover. See Special Tools .