Special Tools
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Illustration | Tool Number/ Description |
|---|---|
| J 2619-01 Slide Hammer |
|
| J 8001 Dial Indicator Set |
|
| J 8092 Driver Handle |
|
| J 8614-01 Flange and Pulley Holding Tool |
|
| J 22761 Differential Side Bearing Installer |
|
| J 22888-D Side Bearing Remover Kit |
|
| J 22912-01 Rear Pinion and Axle Bearing Remover |
|
| J 29369-1 Bushing and Bearing Remover |
|
| J 29369-2 Bushing and Bearing Remover - 2-3 in |
|
| J 29710 Differential Side Bearing Installer |
|
| J 29763 Static Timing Gage |
|
| J 33791 Carrier Bushing Remover/Installer |
|
| J 33842 Pilot Bearing Installer |
|
| J 34011 Pilot Bearing Remover |
|
| J 34672 Depth Micrometer |
|
| J 34673 Flat Gage Bar |
|
| J 36597 Side Bearing Puller Pilot - 9.25 Inch Axle |
|
| J 36598 Holding Fixture |
|
| J 36599-A Side Bearing Nut Wrench |
|
| J 36601 Pinion Shim Selector |
|
| J 36609 Axle Tube Bearing Installer |
|
| J 36615 Side Bearing Nut Wrench |
|
| J 36616 Axle Mount Bushing Remover/Installer |
|
| J 45225 Axle Seal Installer |
|
| J 45754 Pinion Bearing Race Remover/Installer - 9.25 Inch Axle |
|
| J 45765 Pinion Remover - 8.25 inch/9.25 inch Axles |
|
| J 45858 Pinion Bearing Race Remover/Installer - 8.25 Inch Axle |