Differential Carrier Assembly Disassemble (8.25 Inch Axle Lock Ring Style): Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 22912-B Split-Plate Bearing Puller. See Special Tools .
J 2619-01 Slide Hammer
J 29369-1 Bushing and Bearing Remover. See Special Tools .
J 34011 Pilot Bearing Remover. See Special Tools .
J 36598 Holding Fixture. See Special Tools .
J 36599-A Slide Hammer. See Special Tools .
J 36614 Inner Pinion Bearing Installer
J 45765 Pinion Remover. See Special Tools .
J-45858 Front Axle Bearing Race Remover/Installer - 8. See Special Tools .25 Inch Axle
J 8614-01 Flange and Pulley Holding Tool. See Special Tools .