Differential Carrier Assembly Assemble (9.25 Inch Axle): Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 8092 Universal Driver Handle - 3/4 in - 10
J 8614-01 Flange and Pulley Holding Tool. See Special Tools .
J 35512 Inner Pinion Bearing Installer
J 36366 Pinion Oil Seal Installer
J 36599-A Side Bearing Nut Wrench. See Special Tools .
J 36603 Side Bearing Cup Installer
J 36609 Axle Tube Bearing Installer. See Special Tools .
J 36612 Output Shaft Bearing Installer
J 36614 Inner Pinion Bearing Installer
J 36615 Side Bearing Nut Wrench (9. See Special Tools .25 inch axle)