LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Frame And Underbody) >> Repair Instructions >> Rocker Panel Protector Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the assist step if equipped. Refer to Assist Step Replacement (Removable U Step)  or Assist Step Replacement (Tubular BVE)  or Assist Step Replacement (w/WS2, BVX) .
  3. Remove the EVAP canister vent valve bracket. Refer to Evaporative Emission Canister Vent Solenoid Valve Replacement .
    4. Fig 1: Rocker Panel Protector
    GM797217Courtesy of GENERAL MOTORS CORP.
  4. Remove the mounting bolts.
  5. Remove the rocker panel protector from the vehicle.
scientia non olet · About LEMON Manuals