Assist Step Replacement (w/WS2, BVX)
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS CORP.
| Callout |
Component Name |
| 1 |
Assist Step Bolts (Qty: 4)
Tighten:
Tighten the bolts to 85 N.m (63 lb ft).
|
| 2 |
Front Assist Step
- Position the ears of the assist step between the rocker protector and the rocker molding.
- Insert the bolts through the flanges of the rocker protector and into the ears on the assist step.
- Install the inboard bolts first and finger tighten.
- Install the outboard bolts last and finger tighten.
- Tighten all the bolts to the above specified torque value.
|
| 3 |
Assist Step Bolts (Qty: 4) Tighten:
Tighten the bolts to 85 N.m (63 lb ft).
|
| 4 |
Rear Assist Step
- Position the ears of the assist step between the rocker protector and the rocker molding.
- Insert the bolts through the flanges of the rocker protector and into the ears on the assist step.
- Install the inboard bolts first and finger tighten.
- Install the outboard bolts last and finger tighten.
- Tighten all the bolts to the above specified torque value.
|