LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 228 (Suspension Control System - Suspension Damping) >> Repair Instructions >> Electronic Suspension Front Position Sensor Link Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Securing Link Rods To Ball Studs Using J 38185
    GM613614Courtesy of GENERAL MOTORS CORP.
  1. Using the J 38185  install to link rod to the ball stud on the sensor lever and the mounting bracket.
  2. Install the ESC sensor to the vehicle. Refer to Electronic Suspension Front Position Sensor Replacement .