LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (Disc Brake System) >> Repair Instructions >> Front Brake Shield Replacement (1500 Series) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Wheel Hub & Bearing Assembly
    GM1728956Courtesy of GENERAL MOTORS CORP.
  1. Remove the wheel hub and bearing assembly. Refer to Front Wheel Hub, Bearing, and Seal Replacement (2500) or Front Wheel Hub, Bearing, and Seal Replacement (1500) .
    2. IMPORTANT: Note the orientation of the disc brake splash shield for proper assembly.
  2. Remove the splash shield from the steering knuckle.
scientia non olet · About LEMON Manuals