LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 196 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Motor Replacement (Non-HP2) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cooling Fan Motor & Bolts
    GM1505517Courtesy of GENERAL MOTORS CORP.
  1. Remove the cooling blade(s). Refer to Engine Cooling Fan Replacement (Non-HP2)  or Engine Cooling Fan Replacement (HP2) .
  2. Remove the cooling fan motor bolts.
  3. Remove the cooling fan motor(s).
scientia non olet · About LEMON Manuals