Engine Coolant Fan Motor Replacement (HP2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Coolant Fan Motor (HP2)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the cooling blade(s). Refer to Engine Cooling Fan Replacement (Non-HP2) or Engine Cooling Fan Replacement (HP2) Disconnect the electrical connectors from the cooling fans.
1	Cooling fan motor bolts (Qty: 6) NOTE: Refer to Fastener Notice . Tighten: 10 N.m (89 lb in)
2	Cooling fan motor(s).

Callout

Component Name

Preliminary Procedures

Remove the cooling blade(s). Refer to Engine Cooling Fan Replacement (Non-HP2) or Engine Cooling Fan Replacement (HP2)
Disconnect the electrical connectors from the cooling fans.

Cooling fan motor bolts (Qty: 6)

NOTE: Refer to Fastener Notice .

Tighten: 10 N.m (89 lb in)

Cooling fan motor(s).