Turn Signal Multifunction Switch Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Multifunction Turn Signal Switch & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
CAUTION: Refer to SIR Caution . Preliminary Procedure Remove the steering wheel. Refer to Steering Wheel Replacement . Remove the steering column shroud. Refer to Steering Column Shroud Replacement .
1	Turn Signal Multifunction Switch Bolt (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 3 N.m (27 lb in)
2	Turn Signal Multifunction Switch Procedure: Disconnect any electrical connectors as needed.

Callout

Component Name

CAUTION: Refer to SIR Caution .

Preliminary Procedure

Remove the steering wheel. Refer to Steering Wheel Replacement .
Remove the steering column shroud. Refer to Steering Column Shroud Replacement .

Turn Signal Multifunction Switch Bolt (Qty: 2)

NOTE: Refer to Fastener Notice .

Tighten: 3 N.m (27 lb in)

Turn Signal Multifunction Switch
Procedure:
Disconnect any electrical connectors as needed.