LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 (Instrument Panel System Displays & Gages) >> Repair Instructions >> Instrument Cluster Replacement (Except Cadillac)

Instrument Cluster Replacement (Except Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Instrument Panel Cluster Assembly & Screws
GM1680116Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the instrument panel cluster trim plate. Refer to Instrument Cluster Trim Panel Replacement (Cadillac) or Instrument Cluster Trim Panel Replacement (Except Cadillac) .
1 Instrument Panel Cluster Screws (Qty: 4)
NOTE: Refer to Fastener Notice .

Tighten:  2 N.m (18 lb in)

2 Instrument Panel Cluster Assembly
Tip:  A replacement cluster must be programmed. Refer to Control Module References .