LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Instrument Cluster Trim Panel Replacement (Cadillac)

Instrument Cluster Trim Panel Replacement (Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Instrument Panel Cluster Trim Plate Bezel & Clips
GM1702521Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Instrument Panel Cluster Trim Plate Bezel
Tip: 
  1. Position the steering wheel to its lowest possible position.
  2. Use a flat-bladed plastic trim tool in order to release the retainer clips securing the lower edge of the trim plate to the instrument panel.
  3. Pull the trim bezel downward, releasing the tabs at the upper edge of the bezel from the instrument panel upper trim panel.
2 Retainer Clips (Qty: 4)
scientia non olet · About LEMON Manuals