Instrument Cluster Replacement (Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Instrument Panel Cluster Assembly, Bolts & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the instrument panel cluster trim plate bezel. Refer to Instrument Cluster Trim Panel Replacement (Cadillac) or Instrument Cluster Trim Panel Replacement (Except Cadillac) .
1	Instrument Panel Cluster Assembly Bolts/Screws (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Instrument Panel Cluster Assembly Tip: Disconnect electrical connections. A replacement cluster must be programmed. Refer to Control Module References .