Rear Seat Number 2 Belt Buckle Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Belt Buckle & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove third row seat. Refer to Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) or Rear Number 2 Seat Replacement (Suburban/Yukon XL) . Remove seat back pad and cover. Refer to Rear Seat Number 2 Back Cushion Cover and Pad Replacement .
1	Rear Seat No. 2 (Buckle Side) Belt Bolt Tighten: 52 N.m (38 lb ft)
2	Rear Seat No. 2 (Buckle Side) Belt Assembly

Callout

Component Name

NOTE: Refer to Fastener Notice .

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove third row seat. Refer to Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) or Rear Number 2 Seat Replacement (Suburban/Yukon XL) .
Remove seat back pad and cover. Refer to Rear Seat Number 2 Back Cushion Cover and Pad Replacement .

Rear Seat No. 2 (Buckle Side) Belt Bolt

Tighten: 52 N.m (38 lb ft)

Rear Seat No. 2 (Buckle Side) Belt Assembly