Rear Seat Number 2 Cushion Panel Replacement (AW2)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the rear seat. Refer to Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) or Rear Number 2 Seat Replacement (Suburban/Yukon XL) . |
|
| 1 | Rear Seat No. 2 Back Cushion Latch Finish Cover Screw
NOTE:
Refer to Fastener Notice
.
Tighten: 2 N.m (18 lb in) |
| 2 | Rear Seat No. 2 Back Cushion Latch Finish Cover |
| 3 | Rear Seat No. 2 Cushion Compartment Screw (Qty: 3) Tighten: 2 N.m (18 lb in) |
| 4 | Rear Seat No. 2 Cushion Compartment |
| 5 | Rear Seat No. 2 Back Cushion Latch Cover Screw (Qty: 3) Tighten: 2 N.m (18 lb in) |
| 6 | Rear Seat No. 2 Back Cushion Latch Cover |
| 7 | Rear Seat No. 2 Back Cushion Latch Cover Screw (Qty: 3) Tighten: 2 N.m (18 lb in) |
| 8 | Rear Seat No. 2 Back Cushion Latch Cover |