Rear Seat Latch Release Handle Replacement (Rear No. 2)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat Latch Release Handle Assembly & Nut

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) or Rear Number 2 Seat Replacement (Suburban/Yukon XL) . Remove the lower finish cover. Refer to Rear Seat Number 2 Cushion Panel Replacement (AS3) or Rear Seat Number 2 Cushion Panel Replacement (AW2) .
1	Rear Seat Latch Release Handle Nut (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 9 N.m (80 lb in)
2	Rear Seat Latch Release Handle Assembly

Callout

Component Name

Preliminary Procedure

Remove the rear seat. Refer to Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) or Rear Number 2 Seat Replacement (Suburban/Yukon XL) .
Remove the lower finish cover. Refer to Rear Seat Number 2 Cushion Panel Replacement (AS3) or Rear Seat Number 2 Cushion Panel Replacement (AW2) .

Rear Seat Latch Release Handle Nut (Qty: 2)

NOTE: Refer to Fastener Notice .

Tighten: 9 N.m (80 lb in)

Rear Seat Latch Release Handle Assembly