Rear Bumper Step Pad Replacement (All Utility, Cadillac ESV)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Fascia Step Pad

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (All Utility, Cadillac ESV) or Rear Bumper Fascia Replacement (Avalanche, Cadillac EXT) .
1	Rear Fascia Step Pad Tip: Remove the chrome trim piece and use a trim panel removal tool to gently pry the pad upwards. It may be necessary to reach under the backside of the fascia and squeeze the pad clips to assist in the release.